MOT for F873VEL is a TALBOT EXPRESS with petrol fuel in white with a gearbox, registered on the 14th December 1988, vehicle is 36 years 10 months old and has a expired MOT and SORN as of the 27 February 2025.
F873 VEL
| Make | TALBOT |
| Model | EXPRESS |
| Version | |
| Fuel | Petrol |
| Colour | White |
| Gearbox | |
| Registered | 14th December 1988 |
| Age | 36 years 10 months old |
| MOT Status | Expired |
| Expiry Date | 20th July 2024 |
| Road Tax | SORN |
| V5 Issued | 25th July 2021 |
PASSED
| Expiry Date | 20th July 2024 |
| MOT test number | 856730506453 |
| MOT test Date | 21st July 2023 |
| Mileage | 96411 |
| Name | Type |
|---|---|
| Offside Front Nail in tyre () | ADVISORY |
| Battery insecure but not likely to fall from carrier (4.13 (a) (i)) | MINOR |
| Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Jacking point and surrounding area, not within 30cm of mounting (6.1.1 (c) (i)) | ADVISORY |
PASSED
| Expiry Date | 26th June 2023 |
| MOT test number | 693831942672 |
| MOT test Date | 27th June 2022 |
| Mileage | 95103 |
| Name | Type |
|---|---|
| Offside Front Nail in tyre () | ADVISORY |
| Battery insecure but not likely to fall from carrier (4.13 (a) (i)) | MINOR |
FAILED
| MOT test number | 252529110144 |
| MOT test Date | 13th June 2022 |
| Mileage | 94946 |
| Name | Type |
|---|---|
| Offside Front Nail in tyre () | ADVISORY |
| Battery insecure but not likely to fall from carrier (4.13 (a) (i)) | MINOR |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | FAIL |
| Offside Front Inner Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | FAIL |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front arch (5.3.6 (a) (i)) | FAIL |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | FAIL |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front arch (5.3.6 (a) (i)) | FAIL |
FAILED
| MOT test number | 373549409468 |
| MOT test Date | 3rd May 2022 |
| Mileage | 94865 |
| Name | Type |
|---|---|
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill, chalked (7.1.1 (a) (i)) | FAIL |
| Offside Rear Body component slightly loose (6.2.1 (a) (i)) | ADVISORY |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember panel, chalked (5.3.6 (a) (i)) | FAIL |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill, chalked (7.1.1 (a) (i)) | FAIL |
| Nearside Body panel corroded and likely to cause injury sliding door (6.2.1 (a) (i)) | FAIL |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill, front of axle, after spring mount, chalked (5.3.6 (a) (i)) | FAIL |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | FAIL |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember rear panel, chalked (5.3.6 (a) (i)) | FAIL |
| Nearside Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | FAIL |
| Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i)) | ADVISORY |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember panel, chalked (5.3.6 (a) (i)) | FAIL |
| Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i)) | MINOR |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill, chalked (7.1.1 (a) (i)) | FAIL |
| Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i)) | FAIL |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger front of axle (5.3.6 (a) (i)) | FAIL |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill, front of leaf spring (5.3.6 (a) (i)) | FAIL |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | FAIL |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch, chalked (5.3.6 (a) (i)) | FAIL |
| Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | FAIL |
| Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i)) | ADVISORY |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember panel, chalked (5.3.6 (a) (i)) | FAIL |
PASSED
| Expiry Date | 5th May 2022 |
| MOT test number | 363920366097 |
| MOT test Date | 6th May 2021 |
| Mileage | 93070 |
| Name | Type |
|---|---|
| Seat belt anchorage prescribed area is corroded but not considered excessive both front inner sill/step (7.1.1 (a) (i)) | ADVISORY |
| Integral body structure is corroded but structural rigidity is not significantly reduced body/chassis front to rear (6.1.1 (c) (i)) | ADVISORY |
| Brake disc worn, pitted or scored, but not seriously weakened both front discs pitting (1.1.14 (a) (ii)) | ADVISORY |
| Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i)) | ADVISORY |
| Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer/inner sill (6.1.1 (c) (i)) | ADVISORY |
| Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii)) | ADVISORY |
FAILED
| MOT test number | 216881057547 |
| MOT test Date | 26th April 2021 |
| Mileage | 93069 |
| Name | Type |
|---|---|
| Integral body structure is corroded but structural rigidity is not significantly reduced body/chassis front to rear (6.1.1 (c) (i)) | ADVISORY |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | FAIL |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | FAIL |
| Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii)) | ADVISORY |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | FAIL |
| Brake disc worn, pitted or scored, but not seriously weakened both front discs pitting (1.1.14 (a) (ii)) | ADVISORY |
| Offside Front Battery insecure and likely to cause a short circuit battery tray corroded also (4.13 (a) (ii)) | FAIL |
| Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer/inner sill (6.1.1 (c) (i)) | ADVISORY |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at towing eye mounting (5.3.6 (a) (i)) | FAIL |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | FAIL |
| Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | FAIL |
| Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i)) | FAIL |
| Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i)) | ADVISORY |
| Nearside Front Seat belt retracting mechanism defective (7.1.2 (e)) | FAIL |
| Seat belt anchorage prescribed area is corroded but not considered excessive both front inner sill/step (7.1.1 (a) (i)) | ADVISORY |
PASSED
| Expiry Date | 28th January 2021 |
| MOT test number | 583643811414 |
| MOT test Date | 29th July 2019 |
| Mileage | 93044 |
| Name | Type |
|---|---|
| Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii)) | ADVISORY |
| Vehicle generally corroded | ADVISORY |
| Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii)) | ADVISORY |
FAILED
| MOT test number | 818403142634 |
| MOT test Date | 19th July 2019 |
| Mileage | 92988 |
| Name | Type |
|---|---|
| Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii)) | FAIL |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer valance and inner wheel arch (5.3.6 (a) (i)) | FAIL |
| Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii)) | ADVISORY |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | FAIL |
| Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | FAIL |
| Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i)) | FAIL |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer valance (5.3.6 (a) (i)) | FAIL |
| Vehicle generally corroded | ADVISORY |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | FAIL |
| Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii)) | ADVISORY |
PASSED
| Expiry Date | 16th May 2019 |
| MOT test number | 566119332444 |
| MOT test Date | 15th May 2018 |
| Mileage | 92614 |
| Name | Type |
|---|---|
| Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a) | ADVISORY |
| masses of previous welding, unable to see quality of welds | ADVISORY |
| Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f) | ADVISORY |
| Both rear leaf spring mountings corroded | ADVISORY |
| Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i) | ADVISORY |
FAILED
| MOT test number | 199619723782 |
| MOT test Date | 25th April 2018 |
| Mileage | 92593 |
| Name | Type |
|---|---|
| Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a) | ADVISORY |
| Offside Bonnet retaining device excessively deteriorated (8.4.2) | FAIL |
| Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i) | ADVISORY |
| Nearside Headlamp aim too high and too far to the left. (1.8) | FAIL |
| Masses of previous welding and panel work, heavily undersealed and unable to fully inspect welds | ADVISORY |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point and inner arch area (6.1.B.2) | FAIL |
| Rear Suspension spring mounting prescribed area is corroded but not considered excessive both leaf spring mountings (2.4.A.3) | ADVISORY |
| Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f) | ADVISORY |
| Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both sides (2.2.C.1c) | FAIL |
| Offside Headlamp aim too high (1.8) | FAIL |
| Offside windscreen area has been previously repaired, unable to assess exactly to what extent | ADVISORY |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill panel and inner arch lo down (6.1.B.2) | FAIL |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point and inner arch area (6.1.B.2) | FAIL |
PASSED
| Expiry Date | 16th May 2018 |
| MOT test number | 409330626513 |
| MOT test Date | 17th May 2017 |
| Mileage | 91314 |
| Name | Type |
|---|---|
| nearside rear slight brake bind | ADVISORY |
| Front brake disc worn, pitted or scored, but not seriously weakened heavily corroded (3.5.1i) | ADVISORY |
| Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c) | ADVISORY |
| Brake hose slightly deteriorated all (3.6.B.4d) | ADVISORY |
| Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c) | ADVISORY |
FAILED
| MOT test number | 101261723854 |
| MOT test Date | 17th May 2017 |
| Mileage | 91314 |
| Name | Type |
|---|---|
| Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c) | ADVISORY |
| Front brake disc worn, pitted or scored, but not seriously weakened heavily corroded (3.5.1i) | ADVISORY |
| Exhaust emissions carbon monoxide content excessive (7.3.B.1a) | FAIL |
| Battery insecure (1.9.1) | FAIL |
| Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f) | ADVISORY |
| Windscreen washer provides insufficient washer liquid jet aim too high (8.2.3) | FAIL |
| nearside rear slight brake bind | ADVISORY |
| Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c) | ADVISORY |
| Brake hose slightly deteriorated all (3.6.B.4d) | ADVISORY |
| Service brake: efficiency below requirements (3.7.B.7) | FAIL |
| Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f) | FAIL |
| Rear fog lamp not working (1.3.2b) | FAIL |
PASSED
| Expiry Date | 3rd July 2017 |
| MOT test number | 326928749389 |
| MOT test Date | 4th July 2016 |
| Mileage | 90917 |
| Name | Type |
|---|---|
| Rear Tyres cracking | ADVISORY |
| Brakes discs corroded | ADVISORY |
FAILED
| MOT test number | 445303007424 |
| MOT test Date | 9th May 2016 |
| Mileage | 90900 |
| Name | Type |
|---|---|
| Windscreen washer provides insufficient washer liquid (8.2.3) | FAIL |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area (2.4.A.3) | FAIL |
| Offside Rear Direction indicator not working (1.4.A.2c) | FAIL |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step (5.2.6) | FAIL |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3) | FAIL |
| Registration plate lamp not working (1.1.C.1d) | FAIL |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member areas where rear spring hanger mountings locate extending into rear inner wing (2.4.A.3) | FAIL |
| Offside Windscreen wiper not operating automatically when switched on (8.2.1b) | FAIL |
| Offside Headlamp aim too high (1.8) | FAIL |
| Battery insecure (1.9.1) | FAIL |
| Offside Windscreen wiper does not clear the windscreen effectively (8.2.2) | FAIL |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch in frontal centre and rear areas (2.4.A.3) | FAIL |
| Nearside Rear Body has a sharp edge caused by corrosion door (6.1.C.1) | FAIL |
| Offside Front Direction indicator not working (1.4.A.2c) | FAIL |
| Nearside Front Seat belt retracting mechanism defective (5.2.5b) | FAIL |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area (2.4.A.3) | FAIL |
| Offside Rear Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f) | FAIL |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3) | FAIL |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step (5.2.6) | FAIL |
| Nearside Side repeater insecure (1.4.A.2b) | FAIL |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross member area extending into rear inner wing area where rear spring hangers locate (2.4.A.3) | FAIL |
| Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2) | FAIL |
| Nearside Headlamp aim too low (1.8) | FAIL |
| Nearside Front Body has a sharp edge caused by corrosion door (6.1.C.1) | FAIL |
PASSED
| Expiry Date | 20th July 2014 |
| MOT test number | 655846273127 |
| MOT test Date | 25th June 2013 |
| Mileage | 90113 |
| Name | Type |
|---|---|
| Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i) | ADVISORY |
| Front Body has slight corrosion (6.1.B.2) | ADVISORY |
| Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i) | ADVISORY |
| Offside Front Body has slight corrosion (6.1.B.2) | ADVISORY |
| Rear Body has slight corrosion (6.1.B.2) | ADVISORY |
FAILED
| MOT test number | 217135773150 |
| MOT test Date | 24th June 2013 |
| Mileage | 90098 |
| Name | Type |
|---|---|
| Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i) | ADVISORY |
| Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7) | ADVISORY |
| Offside Headlamp insecure (1.7.3) | FAIL |
| Service brake: efficiency below requirements (3.7.B.7) | FAIL |
| Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i) | ADVISORY |
| Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b) | ADVISORY |
| Offside Headlamp aim too high (1.8) | FAIL |
PASSED
| Expiry Date | 20th July 2013 |
| MOT test number | 388834982124 |
| MOT test Date | 2nd July 2012 |
| Mileage | 87230 |
PASSED
| Expiry Date | 20th July 2012 |
| MOT test number | 849062701230 |
| MOT test Date | 21st July 2011 |
| Mileage | 84094 |
FAILED
| MOT test number | 966729291100 |
| MOT test Date | 18th July 2011 |
| Mileage | 84094 |
| Name | Type |
|---|---|
| Registration plate lamp not working (1.1.C.1d) | FAIL |
| Windscreen washer provides insufficient washer liquid (8.2.3) | FAIL |
FAILED
| MOT test number | 200686980155 |
| MOT test Date | 5th July 2010 |
| Mileage | 82509 |
| Name | Type |
|---|---|
| Offside Front Windscreen wiper blade insecure (8.2.2) | PRS |
| Rear Registration plate lamp not working (1.1.C.1d) | PRS |
| Offside rear wheel bearing very slight noise, no play | USER ENTERED |
PASSED
| Expiry Date | 4th July 2011 |
| MOT test number | 152656780152 |
| MOT test Date | 5th July 2010 |
| Mileage | 82509 |
| Name | Type |
|---|---|
| Offside rear wheel bearing very slight noise, no play | USER ENTERED |
PASSED
| Expiry Date | 2nd July 2010 |
| MOT test number | 162014389134 |
| MOT test Date | 3rd July 2009 |
| Mileage | 81270 |
| Name | Type |
|---|---|
| offside rear,nearside rear and offside front tyre side walls getting poor but not showing cords or ply | USER ENTERED |
| Front Exhaust has part of the system slightly deteriorated (7.1.1a) | ADVISORY |
FAILED
| MOT test number | 951740389127 |
| MOT test Date | 29th June 2009 |
| Mileage | 81263 |
| Name | Type |
|---|---|
| Registration plate lamp not working (1.1.5c) | FAIL |
| Front Exhaust has part of the system slightly deteriorated (7.1.1a) | ADVISORY |
| offside rear,nearside rear and offside front tyre side walls getting poor but not showing cords or ply | USER ENTERED |
PASSED
| Expiry Date | 30th June 2009 |
| MOT test number | 700833788192 |
| MOT test Date | 1st July 2008 |
| Mileage | 80597 |
FAILED
| MOT test number | 791302448176 |
| MOT test Date | 21st May 2008 |
| Mileage | 80597 |
| Name | Type |
|---|---|
| Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | FAIL |
| Offside Front Brake pipe excessively corroded (3.6.B.2c) | FAIL |
| Nearside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a) | FAIL |
| Exhaust system not adequately supported (7.1.1) | FAIL |
| Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | FAIL |
| Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | FAIL |
| Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | FAIL |
| Exhaust has part of the system excessively deteriorated (7.1.1a) | FAIL |
| Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a) | FAIL |
| coolant leak (water pump bearing worn) | USER ENTERED |
| Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | FAIL |
PASSED
| Expiry Date | 15th May 2008 |
| MOT test number | 481033327135 |
| MOT test Date | 3rd May 2007 |
| Mileage | 78690 |
FAILED
| MOT test number | 874621427153 |
| MOT test Date | 1st May 2007 |
| Mileage | 78687 |
| Name | Type |
|---|---|
| Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | FAIL |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | FAIL |
| Centre Exhaust system not adequately supported (7.1.1) | FAIL |
PASSED
| Expiry Date | 15th May 2007 |
| MOT test number | 300586836188 |
| MOT test Date | 16th May 2006 |
| Mileage | 77263 |
FAILED
| MOT test number | 112439526173 |
| MOT test Date | 9th May 2006 |
| Mileage | 77260 |
| Name | Type |
|---|---|
| Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a) | FAIL |
| corrosion o/side & n/side front inner wheel arches but not within prescibed area | USER ENTERED |
| Rear Registration plate lamp not working (1.1.5c) | FAIL |
| Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | FAIL |
PASSED
| Expiry Date | 5th May 2006 |
| MOT test number | 170226825153 |
| MOT test Date | 6th May 2005 |
| Mileage | 75556 |
FAILED
| MOT test number | 823104725116 |
| MOT test Date | 4th May 2005 |
| Mileage | 75556 |
| Name | Type |
|---|---|
| Rear Exhaust system not adequately supported (7.1.1) | FAIL |
| Offside Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2) | FAIL |
| Offside Front Headlamp insecure (1.7.3) | FAIL |
| Exhaust system not adequately supported (7.1.1) | FAIL |
| Nearside Front All position lamps not working (1.1.A.3b) | FAIL |
| Front Exhaust has a major leak of exhaust gases (7.1.2) | FAIL |