MOT for B98PVM is a ROVER MINI 25 2 Door Saloon with petrol fuel in red with a gearbox, registered on the 10th August 1984, vehicle is 40 years 8 months old and has a expired MOT and SORN as of the 27 February 2025.
B98P VM
| Make | ROVER |
| Model | MINI |
| Version | 25 2 Door Saloon |
| Fuel | Petrol |
| Colour | Red |
| Gearbox | |
| Registered | 10th August 1984 |
| Age | 40 years 8 months old |
| MOT Status | Expired |
| Expiry Date | 11th April 2025 |
| Road Tax | SORN |
| V5 Issued | 11th November 2023 |
PASSED
| Expiry Date | 11th April 2025 |
| MOT test number | 711258929866 |
| MOT test Date | 12th April 2024 |
| Mileage | 33957 |
| Name | Type |
|---|---|
| Suspension component mounting prescribed area is corroded but not considered excessive front subframe rear mounts (5.3.6 (a) (i)) | ADVISORY |
| Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe at the rear nearside and both forward mounts (5.3.6 (a) (i)) | ADVISORY |
| Oil leak, but not excessive (8.4.1 (a) (i)) | ADVISORY |
FAILED
| MOT test number | 106127480326 |
| MOT test Date | 2nd May 2023 |
| Mileage | 93946 |
| Name | Type |
|---|---|
| Offside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i)) | ADVISORY |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | FAIL |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | FAIL |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber upper mounting (5.3.6 (a) (i)) | FAIL |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | FAIL |
| Nearside Front Shock absorbers has a slightly worn bush (5.3.2 (c)) | ADVISORY |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | FAIL |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength subframe rear mounting - inner wheel arch (5.3.6 (a) (i)) | FAIL |
| Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii)) | FAIL |
| Nearside Front Valve stem slightly damaged (5.2.3 (j)) | ADVISORY |
| Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i)) | FAIL |
| Oil leak, but not excessive (8.4.1 (a) (i)) | ADVISORY |
| Nearside Rear Valve stem slightly damaged (5.2.3 (j)) | ADVISORY |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | FAIL |
| Nearside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i)) | ADVISORY |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | FAIL |
| Offside Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii)) | FAIL |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | FAIL |
| Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b)) | FAIL |
| Offside Front Subframe mounting prescribed area is inadequately repaired floor/inner sill (5.3.6 (a) (i)) | FAIL |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear floor (5.3.6 (a) (i)) | FAIL |
| Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii)) | FAIL |
| Rear fog lamp missing (4.5.1 (a) (ii)) | FAIL |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor/inner sill (5.3.6 (a) (i)) | FAIL |
| Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive rear subframe front mounting area - floor (5.3.6 (a) (i)) | ADVISORY |
| Offside Front Valve stem slightly damaged (5.2.3 (j)) | ADVISORY |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | FAIL |
| Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive subframe rear mounting area - inner wheel arch (5.3.6 (a) (i)) | ADVISORY |
| Offside Rear Valve stem slightly damaged (5.2.3 (j)) | ADVISORY |
| Nearside Rear Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii)) | FAIL |
PASSED
| Expiry Date | 4th May 2023 |
| MOT test number | 175332077955 |
| MOT test Date | 5th May 2022 |
| Mileage | 93783 |
| Name | Type |
|---|---|
| Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c)) | ADVISORY |
| Nearside Front Shock absorbers has light misting of oil (5.3.2 (b)) | ADVISORY |
PASSED
| Expiry Date | 13th April 2022 |
| MOT test number | 891537172313 |
| MOT test Date | 14th April 2021 |
| Mileage | 93405 |
FAILED
| MOT test number | 467100231642 |
| MOT test Date | 6th April 2021 |
| Mileage | 93401 |
| Name | Type |
|---|---|
| Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) | FAIL |
| Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | FAIL |
| Offside Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | FAIL |
| Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) | FAIL |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | FAIL |
PASSED
| Expiry Date | 7th December 2020 |
| MOT test number | 266539070145 |
| MOT test Date | 7th June 2019 |
| Mileage | 92590 |
PASSED
| Expiry Date | 7th June 2019 |
| MOT test number | 527871137799 |
| MOT test Date | 8th June 2018 |
| Mileage | 91908 |
| Name | Type |
|---|---|
| corrosion starting on battery carrier | ADVISORY |
| Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement radius arm (5.3.4 (a) (i)) | ADVISORY |
FAILED
| MOT test number | 806800044477 |
| MOT test Date | 4th June 2018 |
| Mileage | 91908 |
| Name | Type |
|---|---|
| corrosion starting on battery carrier | ADVISORY |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | FAIL |
| Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i)) | FAIL |
| Nearside Front Windscreen wiper not working (3.4 (a)) | FAIL |
| Front Windscreen washer not working off side and near side (3.5 (a)) | FAIL |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | FAIL |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | FAIL |
| Offside Front Windscreen wiper not working (3.4 (a)) | FAIL |
| Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement radius arm (5.3.4 (a) (i)) | ADVISORY |
PASSED
| Expiry Date | 5th March 2018 |
| MOT test number | 377895560392 |
| MOT test Date | 6th March 2017 |
| Mileage | 91908 |
FAILED
| MOT test number | 835602863694 |
| MOT test Date | 20th February 2017 |
| Mileage | 91908 |
| Name | Type |
|---|---|
| Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b) | FAIL |
| Nearside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a) | FAIL |
| Nearside Front engine mounting deteriorated resulting in excessive movement (6.1.D.1a) | FAIL |
| Rear Sub-frame corroded and seriously weakened (2.4.G.1) | FAIL |
| Service brake: efficiency below requirements (3.7.B.7) | FAIL |
| Nearside Front Shock absorber has a serious fluid leak (2.7.3) | FAIL |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) | FAIL |
| Offside Front engine mounting deteriorated resulting in excessive movement under bell housing (6.1.D.1a) | FAIL |
| Rear Sub-frame inappropriately repaired (2.4.A.2) | FAIL |
PASSED
| Expiry Date | 22nd February 2017 |
| MOT test number | 430074520243 |
| MOT test Date | 23rd February 2016 |
| Mileage | 91909 |
FAILED
| MOT test number | 370266340748 |
| MOT test Date | 15th September 2015 |
| Mileage | 91908 |
| Name | Type |
|---|---|
| Bonded suspension unit bonding failed and part of unit is likely to become displaced front subframe o/side front peardrop mounting (2.4.F.2) | FAIL |
| Offside Rear Mechanical brake component locking device missing wheel cylinder (3.5.1l) | FAIL |
| Front passenger door cannot be opened from inside the vehicle (6.2.B.1b) | FAIL |
| Offside Front Front wheel bearing has excessive play (2.5.A.3c) | FAIL |
| Offside Windscreen wiper does not clear the windscreen effectively (8.2.2) | FAIL |
| Brake pipe inadequately supported front section of front to rear (3.6.B.1) | FAIL |
| Body insecure and dangerous to other road users bonnet safety retaining device none existant (6.1.B.1b) | FAIL |
| Nearside Indicator tell tale inoperative (1.4.A.2a) | FAIL |
| slight wear n/side rear radius arm | ADVISORY |
| rear brake recording little or no effort both (3.7.B.5a) | FAIL |
| Nearside Seat belt anchorage prescribed area is inadequately repaired sill (5.2.6) | FAIL |
| Bonded suspension unit bonding failed and part of unit is likely to become displaced front subframe n/side rear mounting (2.4.F.2) | FAIL |
| Nearside Rear Mechanical brake component locking device missing cylinder (3.5.1l) | FAIL |
| Parking brake: efficiency below requirements (3.7.C.1b) | FAIL |
| Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a) | FAIL |
| Nearside Windscreen washer provides insufficient washer liquid (8.2.3) | FAIL |
| Front passenger door cannot be opened from outside the vehicle (6.2.B.1b) | FAIL |
| Offside Rear Suspension component mounting prescribed area is excessively corroded subframe mounting inside rear pocket (2.4.A.3) | FAIL |
| Windscreen wiper does not clear the windscreen effectively too slow and dont park when switched off (8.2.2) | FAIL |
| Offside Front brake caliper securing device loose (3.5.1j) | FAIL |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing patch not continuosly welded (6.1.B.2) | FAIL |
| Bonded suspension unit bonding failed and part of unit is likely to become displaced Front subframe n/side rear mounting (2.4.F.2) | FAIL |
| rear parking brake recording little or no effort both (3.7.B.6a) | FAIL |
| Offside Seat belt anchorage prescribed area is inadequately repaired sill (5.2.6) | FAIL |