MOT for AA11BEK is a AUDI A1 SPORT TFSI S-A 3 Door Hatchback with petrol fuel in black with a 7 Speed S-Auto gearbox, registered on the 11th June 2011, vehicle is 14 years 6 months old and has a expired MOT and Taxed as of the 10 September 2024.
| Make | AUDI |
| Model | A1 |
| Version | SPORT TFSI S-A 3 Door Hatchback |
| Fuel | Petrol |
| Colour | Black |
| Gearbox | 7 Speed S-Auto |
| Registered | 11th June 2011 |
| Age | 14 years 6 months old |
| MOT Status | Expired |
| Expiry Date | 21st September 2024 |
| Road Tax | Taxed |
| Due Date | 1st June 2025 |
| V5 Issued | 9th September 2024 |
| MOT test number | 854802324558 |
| MOT test Date | 9th September 2024 |
| Mileage | 77755 |
| Name | Type |
|---|---|
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | FAIL |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | FAIL |
| Expiry Date | 21st September 2024 |
| MOT test number | 169000576110 |
| MOT test Date | 22nd September 2023 |
| Mileage | 75962 |
| MOT test number | 308961932245 |
| MOT test Date | 18th September 2023 |
| Mileage | 75959 |
| Name | Type |
|---|---|
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | FAIL |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | FAIL |
| Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii)) | FAIL |
| Rear Service brake excessively binding both (1.2.1 (f)) | FAIL |
| Expiry Date | 7th August 2023 |
| MOT test number | 454681382869 |
| MOT test Date | 8th August 2022 |
| Mileage | 68542 |
| Expiry Date | 5th August 2022 |
| MOT test number | 514558629865 |
| MOT test Date | 6th August 2021 |
| Mileage | 57916 |
| Name | Type |
|---|---|
| Rear Brake pad(s) wearing thin (1.1.13 (a) (ii)) | ADVISORY |
| Expiry Date | 17th May 2021 |
| MOT test number | 182893482434 |
| MOT test Date | 18th May 2020 |
| Mileage | 46608 |
| Name | Type |
|---|---|
| Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e)) | ADVISORY |
| Expiry Date | 9th November 2020 |
| MOT test number | 803733984319 |
| MOT test Date | 10th May 2019 |
| Mileage | 40289 |
| Name | Type |
|---|---|
| o/s/f tyre wearing on inner edge | ADVISORY |
| Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i)) | ADVISORY |
| Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e)) | ADVISORY |
| Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i)) | ADVISORY |
| Expiry Date | 8th May 2019 |
| MOT test number | 271787606545 |
| MOT test Date | 9th May 2018 |
| Mileage | 36913 |
| Name | Type |
|---|---|
| Nearside Rear Tyre worn close to the legal limit (4.1.E.1) | ADVISORY |
| MOT test number | 502061967341 |
| MOT test Date | 9th May 2018 |
| Mileage | 36913 |
| Name | Type |
|---|---|
| Nearside Rear Tyre worn close to the legal limit (4.1.E.1) | ADVISORY |
| Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Inner edge (215/45/16 (4.1.D.1a) | FAIL |
| Expiry Date | 11th June 2017 |
| MOT test number | 574832147434 |
| MOT test Date | 7th June 2016 |
| Mileage | 29121 |
| MOT test number | 959061256898 |
| MOT test Date | 7th June 2016 |
| Mileage | 29121 |
| Name | Type |
|---|---|
| Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) | FAIL |
| Expiry Date | 11th June 2016 |
| MOT test number | 126164435178 |
| MOT test Date | 14th May 2015 |
| Mileage | 25952 |
| Expiry Date | 11th June 2015 |
| MOT test number | 677857844165 |
| MOT test Date | 27th May 2014 |
| Mileage | 22012 |
| Name | Type |
|---|---|
| Under-trays fitted obscuring some underside components | USER ENTERED |
| MOT test number | 289417044425 |
| MOT test Date | 27th May 2014 |
| Mileage | 22012 |
| Name | Type |
|---|---|
| Under-trays fitted obscuring some underside components | USER ENTERED |
| Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) | FAIL |